2080
#################################################################################
- ####    IMPORTANT 2080                                                     ####
  ####    In order to use ASM you must start the line with the character !   ####
  ####    Optional you can create a block of ASM using $ASM end $END ASM     ####
#################################################################################
- some new atmel PDF files can not be loaded with the PDF viewer. Viewer is rewritten. it requires the new BASPDF.DLL
- getadc() on m2560 or any other processor with 6 mux bits, does not set mux5 bit for getadc(32) and up. As a work around,use a variable for the channel.
- generic byte compare() function added, based on code and idea from MWS. (Magic White Smoke)
- varexist() did not support ALIAS.
- XMega64A1-SRAM 4-Port-Sample.bas sample added which setup EBI 4 port on XMega.
- when bascom-avr.xml options file exists in the bascom application folder, that option file will be used.
- format is extended to use a variable for the mask.
- config xpin did not support alias for the pin.
- bufspace() did not support uart 5-8
- INSERTCHAR and DELCHAR use Z pointer which must be cleared for XMEGA. fixed in mcs.lib
- programmer did not fetch correct chip from editor when code was not saved. this would give a chip mismatch.
- assigning a negative value to a dword did not throw an error.
- code explorer can show estimated stack usage. see help.
- higher standard baud rates added to terminal emulator
- added support for EDMA in xm8/16/32 E5. See config EDMA
- version() function did not append to string but would overwrite existing string data.
- right() adds an additional null byte when a numeric constant is used for the number of characters to copy. modify mcs.lib and add a RET above _CopyStringExit label.
- new dim option to specify multiple items : dim a,b,c,d as byte failed when using multiple indexed items.
- all dat files updated with CONFIG information.
- printing values from multi index variables failed : print index(index1,index2)
- m1284pdef.dat updated with missing TIFR3 register.
- more fonts in various sizes from Adam Siwek.
- tiny461 and tiny861 only set pcie0 when you enable the PCINT because there is just one interrupt in the chip. See the notes for the chip in the help.
- added m48PB, m88PB and M168PB dat files.
- new Rainbow functions : RB_Color and RB_Copy added by Galahat
- simulator did not show max values of DWORD correct.
- RB_GETCOLOR and RB_LOOKUPCOLOR functions will/can return false result when index is a variable.
- font problems solved : selection of a single character with some fonts.
- simulator can crash for xmega
- when using non-mono font like Arial, text selection does not work properly. Use a font like CONSOLAS.
- power() function for doubles did not work correct when assigned to a function
- SSD1306 i2c oled driver updated for Xmega.
- m649A and m649P dat files added.
- LCDFONT prm, added. prm selects the font table (0-3) of a text LCD.
- CONFIG POWER_REDUCTION set register to 0 in some conditions. Also added LCD and other new Xmega power reduction options.
- CONFIG OSC extended with calibration register settings and DFLL.
- val() for doubles has a bug for XMega >64KB chips
- added flip(byte) function to mirror bits in a byte
- str() for doubles had a bug for xmega >64 KB chips. well not a bug, but it was not supported.
- xmega128B3 dat file added
- readsig also works for normal AVR processors.
- inputbin and printbin load 1 element too many with arrays using base 0.
- config inputbin added to allow reading packets of up to 64 KB
- M324PB dat file added.
- FT810 support added
- I2CINIT enhanced for multiple TWI interfaces like 328PB.
- I2C_TWI-MULTI.lib added to support multiple HW TWI
- second SPI on me328PB added : INIT1SPI, SPI1OUT, SPI1MOVE, SPI1IN
- user donated library I2C DOGS104 driver, SSD1803A included.
- URL2IP(url) function added to W5100 to do DNS lookup using google DNS server
- when defining a const Updateeprom , the eeprom will be updated. which means that the value will only be written when it differs
- config timer1 for tiny 25/45/85 set the wrong register bits. configure this manual.
- the watchdog is disabled as part of the init procedure. it is now disabled BEFORE the optional call to init_micro and not after as in 2079.
- passing string constants with embedded {034} resulted in an extra space.
- accessing passed string array in sub without length info, but with constant index failed.

- big font collection, contributed by Adam Siwek.
- report can be opened in IDE as text file.
- mySmartUSB light programmer support added.
- W5500 socketconnect has a 4-th parameter : nowait. When you make it 1, there is no wait for connection.
- $ROMSTART added : $romstart = &H8000 , will let the code start at &H8000. Default is 0.
- jtag ice mkII programmer new firmware 7.26 from studio resulted in signoff problem. Workaround implemented.
- editor can show unused code in conditional compilation. Edit, Show Excluded Code menu option.
- usbasp programmer updated. chosen clock frequency will work.
- makemodbus() did not support locals/passed parameters properly.
- crc16 supports eeprom memory too. you need to add const CRC16_EEPROM=1 to your code.
- simulator fix for xmega low IO registers. registers were simulated with a 32 byte offset as in plain AVR.
- config lcd has 2 new options : BEFORE and AFTER. with param value of 1 a sub will be called _lcdBefore and _lcdAfter
  just before the LCD is used. This allows for example to turn off interrupts when executing LCD code.
  Only text LCD is supported.
- getadc() when used on normal AVR with offset parameter, and both parameters numeric will give an error when MUX5 bit must be set.
  Use getadc() with just the channel parameter.
- multi dim arrays, added ERAM byte support, and used registers are saved now.
- saving programming buffer as HEX file created wrong HEX files which would not load in Studio.
  This would occur for chips with multiple segments like xmega128   
- Full Kamprog support added. Like changing fuse bytes from within bascom.   
- multi dim arrays had no check on invalid index value (non dimmed)   
- using a constant float without leading 0 resulted in an error : var= var + .12344   
- INPUT did not support DWORD. As a work around, use a LONG overlay.   
- added user definable command buttons to terminal emulator.   
- support added for W5500 tcp/ip chip   
- using {} in constants was not working as expected : Const Cmd_suffix_ver1 = Asc( "{013}") was not interpreted as 13 but 123 (the { sign)   
- changed PDF download from HTTP to FTP. This is quicker and better for the server. PORT 211 is used for FTP.
- atxmega128c3 added.   
- FT800, vertex2ii , the X is clipped. Change call in sub vertex2II into Cmd32 _vertex2ii(___wtmpb , R18 , R17 , R16)   
- support for EADOGXL240-7 I2C added, see eadogxl240-7.bas. This is a customer sponsored lib.   
- added support for SSD1306 I2C OLED, see SSD1306-I2C.BAS.   
- i2c multi bus lib does not clear ERR bit correctly.   
- when a multi dim array is only used within sub/functions and submode=new is used, you get an error since the
  index table is not written. work around : access the array in the main code. for example with a dummy read.   
- multi dim arrays can only be used to read/assign variables. Using them in functions and statements will not work.   
- str() can have an optional parameter to specify the amount of digits. This works for double, but now also for singles.   
- MOD for singles changed in fp_trig.lib so it uses the same algorithm as excel/VBA.   
- FOR..NEXT with words and STEP with values other than 1 will not work properly : for w=1 to 10 step 2
  As a work around use an integer or overlayed integer.The reason is that in 2078 the add code is optimized. Instead of add/adc and loading registers with immediate values it will use subi/sbci but this will set different flags.   
- when opening a single file in non-project mode, the code explorer does not get updated until you set the cursor on the code.
  This also leaves the pinout viewer empty. workaround : open another file or set the cursor/focus to the edit window.   
- R0-R31 internal variables are now exposed as byte variables. This is simple than using getreg/setreg.   
- added option to skip eeprom cell test. This allows to write all FF to the EEPROM whithout erasing the chip.   
- terminal emulator font color could not be selected from the font dialog.   
- added chip name to info panel when chip does not match. no match will give a red font, a match will show font in green.   
- added an error message when $hwstack,$swstack and $framesize are missing from the source.
- hovering the indention line will show the begin of the structure in the tool tip (just try it).   
- stacktrace speed up. big projects made the stacktrace slow.   
- improved speed for showing deadcode/unused variables   
- rotate left|right did not work for xmega port registers.   
- shift left/right did not work for xmega port registers   
- FT801 support added. New FT801 samples. INC files renamed into FT80x.   
- Rainbow/WS2812 support added. See CONFIG RAINBOW. This is the rainbow lib from Galahat, see : http://bascom-forum.de/mediawiki/index.php/Rainbow_Lib